If you are considering setting up a wireless hotspot (WiFi) system in a distributed environment (hotels, camping sites, a small city), there are a number of factors that can affect system performance.
1 Distance
Wireless Network Repeater
Key at any Wi-Fi installation, removal of the primary Internet connection for most customers in the system. If the distance exceeds 500 meters, between the repeater site and the distancemost parts of the site. This is not a technical problem, but may increase the cost of something.
2 Trees
The trees are one of the greatest enemies of wireless Internet connections. The trees absorb energy and prevent the wireless signal to reach the desired destination. Short cut them all down (probably not a desirable state in a camp), you must avoid. This means carefully planning the installation so that youLine of sight of the connections between the main control unit and the repeater, and between the repeaters and the customer units.
Customer 3 units
Metallic coating is also an important enemy radio signals. If customers are in mobile homes or trailer with metal sides, is likely to require a type of external antenna on the device. Camper saavy who are probably looking for wireless access to the Internet already knows, but some can not. This is not so mucha problem than an opportunity. RV camping in stocks can open shop equipment, and are renting or selling to your customers. There may be another source of income.
4 Land
You also need to plan the installation site. Also, remember that you must be on the line of sight wireless work well. You may need to install antennas on tall poles in order to obtain the lower parts of the plant.
The easiest waydetermine any problems that might exist in your facility, call for an investigation on the spot. Most system vendors hotspots using satellite maps, distances and problems of land, which can lead to a certification, and a survey will provide a complete assessment of installation costs.
5 Customers laptops
We want to tango, but also to make a good wireless connection. Your mobile device will likely put out a good amount of power (100 milliwattsis typical), but the average handheld wireless device removes about 30 milliwatts. What this means is that the situations in which the portable wireless system can hear but can not speak. This can also be an opportunity, because the higher power units are available for laptops and are cheap. Therefore, it should be available in your store.
6 Internet
All connections of customers to the wireless system is to go out through yourPrimary Internet connection. You must have sufficient bandwidth, which is usually not a problem if you are also providing telephone support to customers. But you need to check with your Internet service provider (read the terms and conditions) to see if they have restrictions on how many people may need to be connected to the system. The people of the cables are the most picky, we have not heard any problems with the DSL or satellite.
7 Length of stay
Depending on whetherThey want to keep their customers in good standing for a day or stay for weeks at a time, you want to customize the wireless system for this type of use. For customers short stay, we generally recommend a pay as you go system, where the customer uses his credit card to buy access in units of one hour or one day. For a customer stay longer, you can use wireless access as part of their service offerings and include the cost of rent.
8 contain VOIP
ManyInstallations of hotspots are enabled VOIP phone service means that you can add on top of the wireless Internet service. You can maintain or cordless phones Android phones anywhere in contact with the staff on site, or you can offer a telephone service for your guests as well. The only cost is per minute, billed to the customer when they call normal phone numbers. Calls to employees on the site are free.
9 Costs
Above all, have a fixedEstimated costs before completing the installation. Unlike the cost of USIT and the authentication service is the only other costs you have to do is to hire a local network setup, things should not cost more than $ link 200-300.
Nine activities in creating a wireless hotspot Considerwireless network repeater