Linksys Wmb54G Vista Setup - How to Configure Wireless Music Bridge to Work With Your Computer

Streaming music from your computer speakers wirelessly via wi-fi sounds like a great idea and it is but if you purchased a Linksys Wmb54G and tried setting it up on your Vista machine, chances are you gave up and threw the gadget out the window. Thanks to Google and some trial and error, I figured out how to get this "non-Vista" gadget working on a Vista computer.

It's wonderful to me that Linksys didn't make this gadget Vista compatible but I am not here to write about that. Instead, I will show you step by step how to get this wireless music bridge to work on your computer.

1. Throw the Cd that came with the unit out! If you happen to run the software on your computer, you will have more problems than you can image.

Important - The utility agenda is registry heavy so if you installed the old version that came on the Cd, you will most likely have issues even if you Un-install it and install the new version. I had to do a theory restore and restored my theory prior to installing the original utility program.

2. Go to Linksys Drivers and download

Xp, Vista Setup Wizard (Xp and Vista) Ver.2.18

Xp, Vista Firmware (Xp and Vista) Ver.2.18

3. Connect the wireless music bridge directly into the Ethernet port of your computer - Not into your router (you will loose Internet connection unless you are using wireless so print this page in case you need to come back to these directions.

4. Run the firmware agenda - it's pretty self explanatory - make sure the gadget is plugged into the wall and your computer and do not interrupt the process. The new firmware version should be 2.18

5. Once the firmware is upgraded, run the installation agenda by double clicking on the "setup" file.

6. Click where it says "Click here to start" - this will detect the bridge linked to your Ethernet port. Once connected, you can add a password, change the name and set it up to be seen on your wireless network.

*If you use Wpa or Wpa2 safety in your network, it is the equivalent to Psk and Psk-2 in the Linksys setup so just be aware that you will not see anything about Wpa

7. Once the gadget is all configured, it will ask you to install the utility which is the agenda that runs on your computer that sends the audio to the device. effect the on screen prompts and install the utility. You will probably get an error after installing the utility because it will not run on Vista as is - just close the error message and continue.

8. After all things is installed, you can disconnect the Ethernet cable from your computer.

Here Is The important Part To Get It Working In Vista

9. Click on Start and type in "msconfig" where it says "start search".

10. Click on the startup tab and find "Cmflywave Application" - uncheck the box to the left of it and click Ok.

11. Find these three files on your hard drive:

cmas2ds.exe

cmflywav.exe

wmb54g.exe

(look for them inside the linksys install folder in agenda files)

12. Right-click on each of these files and go to properties - Then find the compatibility tab and check the box where it says "Run this agenda in compatibility mode for: and make your mind up (Windows Xp aid Pack 2) and then click Ok.

13. Now, double click on these 3 files in this order:

cmas2ds.exe

cmflywav.exe

wmb54g.exe

The utility should now run successfully in Vista. Click on "Scan for music bridge" and your gadget will show up in the list. Click on the gadget and click "connect" and now all your audio will be sent to the bridge.

....................................................................................................................................

So a few days went by and all of a sudden, the music was not being transferred to the wireless bridge. I do not know if I reboot or what but now either the bridge showed as linked or not, the music was just arrival out of the computer speakers.

What I did then was go to my sound settings and right click on the active gadget for the computer speakers - I then disabled them.

Next I reboot the computer and when it came back up, I verified that the computer speakers were disabled. I then went to the Linksys folder and double clicked on cmflywav.exe and wmb54g.exe (Not cmas2ds.exe)

The bridge was able to Connect and the music transferred.

In conclusion, this gadget was more ill than it was worth. I paid with shipping for a refurbished model and all the hours wasted trying to get it to work were not worth the money I saved on the device. If you are not a tech savvy person, this gadget is Not for you. Linksys needs to get on the ball and settle all the software issues with the Wmb54G.

Refurbished HTC Cell Phones Pressure Sensor Transducer Parallel To USB Cables

How Do I connect My Bluetooth Phone To My Computer

Your first question might of course be, why would I want to connect my bluetooth phone to my computer? It is a great way to change photos, mp3's and other files from your mobile phone to your computer without the purchase of cables that only work with one phone or expensive software for a definite phone.

How do I connect my bluetooth phone with my computer? First you need to turn your phones visibility on. Most phones you do this by going into the menu, settings and they should be an selection for "connections." Bluetooth will or should be under your connects, like I said this is for most phones. You need to first make sure your bluetooth is turned on. Next you need to turn on your bluetooth's visability.

Setting Up A Wireless Printer

As far as your computer goes. You whether need a laptop/tower with bluetooth build in or a bluetooth Usb adapter. You can commonly get a bluetooth Usb adapter for less than , and these are very beneficial and can be used with complicated phones, which is great about bluetooth.

After you have your bluetooth Usb installed on your computer, then you need to sync them together. The easiest way that I have found to do this is to do it from the phone. Under your bluetooth settings under your phone, they should be an selection to search for new devices or to pair it. Once your achieve the search it should find your computer. plump to pair it with your computer. It will ask you for the passcode on the phone it should be "0000" that is four zeros. You should get a pop up from the theory tray on a windows machine request if you want to pair your bluetooth with this device. You need to tell it yes and it will ass for the passcode, which again is four zeros "0000." You should then be ready to use your bluetooth enabled phone with your computer.

How Do I connect My Bluetooth Phone To My Computer

Chelsea FC Goals Olympique Lyon Goals

Computer Cable Networks - types and uses FAQ

Many types of network cables are used for the construction of networks of computers. These cables are used to meet the varying needs of different types of computer network. Before setting up a network, you need to know the variety of network cables.

To set up a computer network, you must understand some basic terms. With switches, hubs and cables in a common computer network, but for maximum profitThe efficiency, the right kind of equipment and lines necessary. The cables are separated in terms of speed for data transmission, reducing crosstalk and how to install. Find answers to frequently asked questions (FAQ) about the different types of network cables and their uses.

Wireless Network Repeater

Question: What is a network cable is not shielded?

A twisted pair are widely used by Ethernet networks. The twisted pairs of wires in the cable, as the name suggests, are not shielded. Eight individual copper wires (22 or 24 gauge) four-pair, making the sign of corruption by electromagnetic interference limits. UTP cable must meet the requirements for the number of rotations that are allowed in a defined length. A relatively small diameter of the cable during the installation of an advantage. The speed and throughput of this cable is 10 to 1000 Mbps and is the most convenient> Network Cables. This cable is very popular because it can be used effectively with the critical network infrastructure.

Question: What is a shielded network cable?

R. In twisted pair shielded cable, a metal foil to wrap each pair of copper wires that are then used in a total overlapping wire mesh. STP not only reduces external interference such as EMI and RFI radiation, but also the electrical noise in the cables asCrosstalk and pair-pair coupling. It is usually installed with STP data connector, but also based RJ. In contrast to UTP, are a pair in this series and only two are relatively difficult to install. During installation, you must ensure that the metallic shield grounded at both ends.

Question: When I need a shielded cable and what kind do I need?

A. The primary use of shielded cables will improve the signal transmission paththe cables and protect them from interference such as crosstalk, electromagnetic interference (EMI) and radio frequency interference. This disorder usually occurs if there are any bends or crimps in the neighboring structures. These cause the transmission of data to slow down. Common sources are causing interference by large motors and generators, radio towers and high-voltage lights.

Question: What is a crossover cable?

A. A crossover cable, also known as cross wiredCable is a cable network that is used to connect two network devices without the need for a hub or switch. These cables are completed clearly on their ends with pairs of green and orange. This cable also allows you to directly access the hardware on the same network.

Question: What is an audio cable?

A. Inside the jacket of a solid cord, which is also known as a tow cable, there is only one piece of copper wire. Solid wireprovide mechanical strength and because it is a single conductor, this cable can be used for structured cabling within a building. In an insulation displacement connection, is simple, solid, however.

D. Cos' is a thread?

R. One strand consists of many thin copper wires in a bundle with a jacket. Each of these fine wires inside the cable can be bent and flexed easily. Because of their flexibility, these cables are mainly to make patch cablescan be simply connected, installed and connected. Even if the hoses are often distorted these effects or damage to the power of the signal.

D. What kind do I need one or blocked?

A. Although both the cables, single-stranded and have the same intensity of the signal cables are considered more flexible for short periods because of their flexibility. On the other hand, filled cables are much better for long cable runs.

Question: What is the maximum length?

A.The recommended maximum length of network cable is 330 feet (100 m), based on solid wire, as it is the preferred choice for the maximum length of the base. Always make it a point to use the repeater for the length of the cable connection. The distance between the two patch cables should be 30 feet (8 m). another thing you need to pay attention to is the curvature of the cable. Because they are designed with the lowest ability to flex, the signals in the event of a serious decline can be slowed.

Q.What is RJ45?

A. Like the lines on the road for traffic control, connect the end of the cable, line-up in physical locations of wires in itself. In the network installation, RJ45 connectors are used specifically for connecting Ethernet devices.

Computer Cable Networks - types and uses FAQ

wireless network repeater

Insect Killer Concentrate Sony Remote Tripod Indoor Insect Fogger

PC Hardware Peripherals - Parts of a computer system

To begin, we define the difference between hardware and computer software. While the computer hardware, physical objects also known as computer hardware, hardware devices or computer parts are all parts of a computer, physical fitness, a computer system.

Software on the other side is not a physical item and is only a program such as instructions for the hardware to follow written. A simple example serves to himself, a grocery storeList and a pen. Imagine a piece of hardware is the pencil a DVD / CD Burner is a piece of paper in the list written on a disk. These are all physical objects and are referred to as hardware, software is the contents of the list is not a physical object, but only with written instructions on what you need.

Wireless Network Repeater

Now break the different hardware names (terms), we have the computer hardware, which is basically a piece of hardware,easy for a purpose, such as a floppy or a mouse. Another familiar name, discussing computer computer hardware is the hardware component. Computer hardware components, the individual hardware components that make up the entire computer system, such as a processor on the motherboard or hard drive.

We also have hardware that is similar to the hardware device with the exception that the addition of an extension of the computer hardware and peripheralsSystem, like printer, speakers or a digital camera. The word of years by the construction sector related to hardware are used for resistance of materials used and the term was coined for the computer systems developed to improve the description of the physical structure of the whole computer nuts and bolts.

PC Hardware Peripherals - Parts of a computer system

wireless network repeater

Ortho Ecosense Indoor Insect Killer Bedbug Anatomy